Retroflag GPi Case 2W
⚐ Spotted a wrong spec? Report a correction
The GPi Case 2W is a vertical retro gaming handheld released in 2022 by Retroflag. It is built around the Broadcom BCM2710A1 (Raspberry Pi Zero 2 W) with 512 MB LPDDR2 SDRAM, has a 3.0 inch IPS 640 x 480 display, and uses a 2800 mAh battery. Its documented emulation ceiling is PS1 full speed, placing it in the mid-range tier for retro game emulation. Notable hardware features include video output, WiFi, Bluetooth 4.2 support.
How far can it go?
Runs everything up to PlayStation 1 at full speed, and pushes as far as Dreamcast with some compromises.
Full speedGreatPlayableBarelyWon't run
Realistic ceiling: SNES FX & 3D PS1 (60 FPS), N64 & NDS (playable but can be laggy)
Specifications
| Chip (SoC) | Broadcom BCM2710A1 (Raspberry Pi Zero 2 W) |
|---|---|
| CPU | Cortex-A53 |
| GPU | Broadcom VideoCore IV |
| RAM | 512 MB LPDDR2 SDRAM |
| Screen size | 3.0 inch |
| Screen type | IPS |
| Resolution | 640 x 480 |
| PPI | 266.67 PPI |
| Refresh rate | 60 Hz |
| Aspect ratio | 4:3 |
| Battery | 2800 mAh |
| Storage | External MicroSD |
| Connectivity | WiFi, Bluetooth 4.2 |
| Speakers | Single Mono Front facing |
| Charge port | DC Power (Barrel Connector) |
| Video output | ❌ |
| Audio out | 3.5mm Headphone Bottom facing |
| Dimensions | 135 mm x 81 mm x 32 mm |
| Weight | 224 grams |
| Shell | Plastic |
| Colors | DMG Gray |
Compare prices & buy
from $80
$80
Often sold by: Amazon