Miyoo / Bittboy Bittboy V3
⚐ Spotted a wrong spec? Report a correction
The Bittboy V3 is a vertical retro gaming handheld released in 2019 by Miyoo / Bittboy. It is built around the Allwinner F1C100S with 32 MB SDRAM, has a 2.4 inch IPS 320 x 240 display, and uses a 700 mAh battery. Its documented emulation ceiling is GENESIS full speed, placing it in the budget tier for retro game emulation.
How far can it go?
Runs everything up to Genesis / Mega Drive at full speed, and pushes as far as SNES with some compromises.
Full speedGreatPlayableBarelyWon't run
Realistic ceiling: GBA mostly runs fine, some non-FX SNES & 2D PS1 runs ok but can be laggy
Specifications
| Chip (SoC) | Allwinner F1C100S |
|---|---|
| CPU | ARM926EJ-S |
| GPU | 2D accelerator |
| RAM | 32 MB SDRAM |
| Screen size | 2.4 inch |
| Screen type | IPS |
| Resolution | 320 x 240 |
| PPI | 166.67 PPI |
| Refresh rate | 60 Hz |
| Aspect ratio | 4:3 |
| Battery | 700 mAh |
| Storage | External MicroSD |
| Connectivity | ❌ |
| Speakers | Single Mono Front facing |
| Charge port | Micro USB |
| Video output | AV Out |
| Audio out | 3.5mm Headphone |
| Dimensions | 99 mm x 68 mm x 13 mm |
| Weight | 80 grams |
| Shell | Plastic |
| Colors | DMG Grey |
Pros & cons
👍 Pros
- Cheap
- Good variety of software, big fanbase
👎 Cons
- Screen tearing
- Ghost buttons (v1 and v2)
- No shoulder buttons
Compare prices & buy
from $30
$30
Often sold by: Aliexpress · Retromimi · Bittboy.com · Amazon